Skip to content
Owens Corning VentSure RidgeProwler 30 Rolled Ridge Vent, 13-7/8 in. x 30 ft.
Regular price $92.50Orders start at $399 — combine any items to reach the minimum. Learn more
Owens Corning VentSure RidgeProwler 30 Rolled Ridge Vent, 13-7/8 in. x 30 ft.
The Owens Corning VentSure RidgeProwler 30 is a rolled ridge vent, 13-7/8 in. wide x 30 ft. long, one roll per order. Curved external baffles promote attic airflow while protecting against the elements, and flat side vents reduce clogging from leaves and pine needles. It includes built-in end plugs and 2 coils of 1-3/4 in. nails.
Key Features:
- Curved external baffles: Unique curved external baffles protect against the elements while promoting airflow out of the attic.
- Debris-resistant vents: Flat side vents reduce leaves and pine needles from clogging the exhaust.
- Internal baffle system: Internal baffle system helps keep weather out.
- Easy 30 ft. roll: Easy-to-handle 30 ft. roll format.
- Nail gun ready: Nail gun installation ready with cut lines every 6 in. and built-in end plugs.
- Nails included: Includes 2 coils of 1-3/4 in. nails.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Owens Corning |
| Sell unit | 1 roll, 13-7/8 in. x 30 ft. |
| Product line | Owens Corning VentSure RidgeProwler 30 |
| Dimensions | 13-7/8 in. x 30 ft. |
| Length | 30 ft. per roll |
| Width | 13-7/8 in. |
| Cut lines | Every 6 in. |
| Included fasteners | 2 coils of 1-3/4 in. nails |
| Installation | Nail gun installation ready |
| Intended use | Attic exhaust ventilation along the roof ridge |
Coverage & How Much You Need:
One 30 ft. roll vents up to 30 linear ft. of ridge; measure your ridge run, subtract allowances for hip transitions or other vents, and order enough rolls to cover the total length.
Fit and Compatibility:
Part of the Owens Corning VentSure ventilation line and sized for standard ridge installation on shingle roofs. Ridge cap shingles are installed over the vent and sold separately; pair with VentSure intake ventilation for balanced airflow.
Frequently Asked Questions (FAQ):
Q: What is included in the box?
A: One 13-7/8 in. x 30 ft. rolled ridge vent with built-in end plugs and 2 coils of 1-3/4 in. nails.
Q: How much ridge does one roll cover?
A: One roll covers up to 30 linear ft. of ridge.
Q: Can I cut it to length?
A: Yes, the roll has built-in cut lines every 6 in. for custom lengths.
Q: Does it work with a nail gun?
A: Yes, it is nail gun installation ready.
Q: How does it keep debris out?
A: Curved external baffles plus flat side vents reduce clogging from leaves and pine needles, and internal baffles help keep weather out.
Q: Do I need intake vents too?
A: Balanced attic ventilation requires intake air; pair with compatible intake venting such as the VentSure line.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Cut the roll on the marked 6 in. lines to fit the exact ridge run and use the built-in end plugs to close the ends cleanly. Before installing, confirm your attic has adequate intake ventilation so the RidgeProwler can exhaust effectively. Fasten with the included 1-3/4 in. coil nails through to solid framing per the manufacturer instructions.
Work on ridges requires fall protection; cut the vent and roll shingles safely on the deck before moving material to the ridge.
Order the Owens Corning VentSure RidgeProwler 30 rolled ridge vent for long-lasting attic ventilation.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
