Skip to content
Metal Flashings Drip Edge 2 in. x 2 in. and 2 in. x 4 in. 28 Gauge Metal Roof Edging
Regular price $17.02Orders start at $399 — combine any items to reach the minimum. Learn more
Metal Flashings Drip Edge 2 in. x 2 in. and 2 in. x 4 in. 28 Gauge Metal Roof Edging
Metal Flashings Drip Edge is formed galvanized steel roof edging offered in 2 in. x 2 in. and 2 in. x 4 in. profiles in 28 gauge, with select 90 and 120 degree variants. Colors include Bronze, Black, Charcoal Gray and Almond. Sold per piece, board or each depending on the profile; pair with underlayment and shingle starter courses at eaves and rakes.
Key Features:
- 28 gauge metal: Formed from 28 gauge metal for durable edge protection along eaves and rakes.
- Two profiles: Available in 2 in. x 2 in. and 2 in. x 4 in. face profiles.
- Bent options: Select 2 in. x 4 in. variants are formed at 90 degree or 120 degree angles.
- Four colors: Offered in Bronze, Black, Charcoal Gray and Almond to coordinate with common shingle colors.
- Drip-off design: Drip edge profile directs water away from the fascia and into the gutter.
- Job-site quantities: Sell units of piece, board or each support both small repairs and full re-roofs.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Metal Flashings |
| Sell unit | 1 piece (PC) or board depending on variant |
| Product line | Drip Edge |
| Available colors | Bronze, Black, Charcoal Gray, Almond |
| Available sizes | 2 in. x 2 in. 28 GA; 2 in. x 4 in. 28 GA; 2 in. x 4 in. 90 degree; 2 in. x 4 in. 28 GA 120 degree |
| Material | Metal |
| Dimensions | 2 in. x 2 in. or 2 in. x 4 in. |
| Thickness | 28 GA |
| Angle | Standard, 90 degree or 120 degree depending on variant |
| Intended use | Roof edge flashing at eaves and rakes |
Coverage & How Much You Need:
Sold by the piece, board or each; plan linear footage along all eaves and rakes and add laps at joints per standard drip edge practice.
Fit and Compatibility:
Installs under eave courses and over rake underlayment beneath shingles on asphalt and metal roofing systems; pair with matching-color starter and gutter products.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One drip edge section in the color, profile and bend angle selected; the sell unit is per piece, board or each depending on the variant.
Q: Which size should I choose?
A: 2 in. x 2 in. suits standard eave details, while the 2 in. x 4 in. profile provides a wider flange face; choose 120 degree bends where a steeper fascia angle is needed.
Q: What colors are available?
A: Bronze, Black, Charcoal Gray and Almond.
Q: Is this galvanized?
A: It is a formed metal drip edge in 28 gauge; the sources list material as metal only, so confirm the substrate with the spec sheet for your variant.
Q: How do I install it?
A: Fasten along the edge at recommended spacing, lap joints in the direction of water flow, and install eave edges under the starter course and rake edges over the underlayment.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Match the drip edge color to the shingle or gutter for a clean roofline. The 2 in. x 4 in. profile gives more nailing surface and better coverage on wide fascia boards, and 120 degree bends suit sloped fascia details. Keep laps shingle-fashion with the water flow and use ring-shank or corrosion-resistant fasteners in coastal areas.
Wear cut-resistant gloves and eye protection when handling and cutting formed metal edges.
Order Metal Flashings Drip Edge in the color and profile that matches your roof edge details today.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
