Skip to content
Carlisle Sure-Seal Pressure-Sensitive ElastoForm Flashing 60 Mil Uncured EPDM Roll, 9" or 12" x 50 ft, Black
Regular price $415.00Orders start at $399 — combine any items to reach the minimum. Learn more
Carlisle Sure-Seal Pressure-Sensitive ElastoForm Flashing 60 Mil Uncured EPDM Roll, 9" or 12" x 50 ft, Black
Carlisle Sure-Seal Pressure-Sensitive ElastoForm flashing is a nominal 60-mil uncured EPDM membrane laminated to a nominal 30-mil fully cured pressure-sensitive adhesive. Rolls are sold individually in black in .060" x 12" x 50' or .060" x 9" x 50'. It self-cures in place and flashes pipes, scuppers, and other rooftop penetrations and structures.
Key Features:
- Self-curing: Uncured EPDM membrane self-cures in place, conforming and sealing over time.
- Highly adaptable: Easily malleable and highly adaptable to irregular shapes and surfaces.
- PS adhesive: Nominal 30-mil fully cured pressure-sensitive adhesive laminated to the membrane for fast, clean application.
- Versatile flashing: Flashes pipes, scuppers, and other rooftop structures and penetrations.
- Labor savings: Delivers labor and cost savings in field applications compared with solvent-bonded flashing.
- Split liner: On the 12-inch-wide product, the clear poly release liner is pre-slit down the center for easier partial removal during installation.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Carlisle |
| Sell unit | 1 roll |
| Product line | Carlisle Sure-Seal PS ElastoForm Flashing |
| Available colors | Black and Gray (Gray approved for use on Gray TPO membrane); items on this page are Black |
| Available sizes | 6" x 100', 9" x 50', and 12" x 50' rolls; this page lists 9" x 50' and 12" x 50' |
| Material | Uncured EPDM membrane |
| Thickness | Nominal 60 mil membrane laminated to nominal 30 mil PS adhesive (approx. 90 mil total) |
| Dimensions | .060" x 9" x 50' or .060" x 12" x 50' |
| Adhesive | Fully cured pressure-sensitive adhesive |
| Liner | Clear poly release liner; pre-slit on the 12" width |
| Intended use | Flashing pipes, scuppers, and rooftop structures/penetrations |
Coverage & How Much You Need:
A 9" x 50' roll yields 37.5 lin ft of flashing; the 12" x 50' roll yields 50 lin ft. Size rolls by the perimeter of the penetrations being flashed, allowing overlap at laps and around irregular shapes.
Fit and Compatibility:
Use within Carlisle Sure-Seal EPDM systems with pressure-sensitive detailing products and primer where required. Gray ElastoForm is approved for use on Gray TPO membrane; the rolls listed here are black.
Frequently Asked Questions (FAQ):
Q: What is included in one order?
A: One roll of black ElastoForm flashing, in either 9" x 50' or 12" x 50', with a clear poly release liner.
Q: What thickness is the flashing?
A: A nominal 60-mil uncured EPDM membrane laminated to a nominal 30-mil fully cured pressure-sensitive adhesive.
Q: What can it flash?
A: Pipes, scuppers, and other rooftop structures and penetrations, including irregular shapes and surfaces.
Q: Is a wider roll easier to work with?
A: Yes, the 12-inch product's release liner is pre-slit down the center so you can partially remove the liner during installation.
Q: Is there a gray option?
A: The ElastoForm line includes gray, which is approved for use on Gray TPO membrane; the rolls on this page are black.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
Uncured PS flashing is ideal for irregular penetrations where cured flashing will not conform; form it around the penetration and it self-cures into a durable boot. Cut it generously so you are not stretching the membrane into stress points. Keep the release liner in place until the membrane is positioned, and roll firmly to bond, especially in cold weather.
Follow the manufacturer's installation instructions and safety data sheet for pressure-sensitive products, and work carefully around hot stacks and vents before flashing.
Order Carlisle Sure-Seal PS ElastoForm flashing for fast, conformable flashing of pipes and penetrations.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
