Skip to content
Capital Sheet Metal TPO-Clad Drip Edge, White, 24 Ga, 2 in. x 4 in. or 3 in. x 3 in., 10 ft. Length
Regular price $58.50Orders start at $399 — combine any items to reach the minimum. Learn more
Capital Sheet Metal TPO-Clad Drip Edge, White, 24 Ga, 2 in. x 4 in. or 3 in. x 3 in., 10 ft. Length
The Capital Sheet Metal TPO-Clad Drip Edge is a 10-ft. length of coated G-90 metal drip edge with a weldable TPO surface for TPO membrane roofing. Choose 24-gauge 2 in. x 4 in. or 3 in. x 3 in., both in white, sold per piece. It works with TPO single-ply membrane systems on commercial roofs.
Key Features:
- Weldable TPO surface: The exposed surface is a weldable TPO material that bonds directly to TPO membrane.
- Coated G-90 steel: Made from coated G-90 galvanized steel for corrosion resistance.
- 10 ft. lengths: Each piece comes in a 10-foot length for efficient coverage of roof edges.
- Two profile sizes: Available in 2 in. x 4 in. and 3 in. x 3 in. profiles, 24 gauge.
- White finish: Offered in white to match typical TPO membrane installations.
- Commercial grade: Built for professional roofing contractors working on single-ply systems.
Specifications Table:
| Specification | Details |
|---|---|
| Brand | Capital Sheet Metal |
| Sell unit | 1 piece (PC), 10 ft. length |
| Product line | TPO-Clad Drip Edge |
| Available colors | White |
| Available sizes | 2 in. x 4 in. 24 ga; 3 in. x 3 in. 24 ga |
| Material | Coated G-90 galvanized steel |
| Gauge | 24 ga |
| Length | 10 ft. |
| Finish / texture | Weldable TPO-clad surface, white |
| Dimensions | 2 in. x 4 in. or 3 in. x 3 in. face profiles |
| Category | Commercial Roofing > Metal Edging > Drip Edge |
| Intended use | Edge metal with weldable TPO surface for TPO membrane roofs |
Coverage & How Much You Need:
Each piece is a 10 ft. length of drip edge; divide total linear feet of roof perimeter by 10 and add a small allowance for seams to size the job.
Fit and Compatibility:
Designed for TPO single-ply membrane roofing systems; the TPO-clad surface is weldable so membrane or TPO cover strips can be heat-welded to it. Not intended for EPDM or asphalt shingle details.
Frequently Asked Questions (FAQ):
Q: What is included?
A: One 10-ft. piece of white 24-ga TPO-clad drip edge per unit in the 2 in. x 4 in. or 3 in. x 3 in. profile.
Q: Can the membrane be welded directly to it?
A: Yes, the TPO surface is weldable, so TPO membrane or flashing can be heat-welded to the face.
Q: What is the base metal?
A: It is coated G-90 galvanized steel, 24 gauge.
Q: How do I estimate how many pieces I need?
A: Measure the roof perimeter in linear feet, divide by 10, and add allowance for laps and cuts.
Q: What colors are available?
A: This line is offered in white.
Expert Verdict — Reviewed by the SuperArbor Pro Desk
TPO-clad edge metal saves labor on single-ply roofs because the membrane welds straight to the drip edge instead of relying on termination bars and sealant. Confirm the profile matches your edge detail before ordering; the 2 x 4 profile gives a deeper hem than the 3 x 3. Keep the weldable surface clean and unscratched during handling so welds hold.
Wear cut-resistant gloves and eye protection when handling and heat-welding TPO-clad metal edging.
Get the Capital Sheet Metal TPO-Clad Drip Edge for your next TPO roofing job.
All third party trademarks, including logos and icons, referenced on our website and product pages remain the property of their respective owners. Unless specifically identified as such, Arbor's use of third party trademarks does not indicate any relationship, affiliation, sponsorship, or endorsement between Arbor Home and the owners of these trademarks. Any references by Arbor Home to third party trademarks are to identify the corresponding third party goods.
