{"product_id":"carlisle-syntec-carlscmp25g-carlisle-syntec-liquiseal-concrete-masonry-primer-1-4-gallon-sachet-translucent-amber","title":"Carlisle SynTec Liquiseal Concrete \u0026 Masonry Primer 1\/4 Gallon Sachet Translucent\/Amber","description":"\u003ch1\u003eCarlisle SynTec Liquiseal Concrete \u0026amp; Masonry Primer 1\/4 Gallon Sachet Translucent\/Amber\u003c\/h1\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eCarlisle SynTec's Liquiseal Concrete \u0026amp; Masonry Primer is a solvent-free, two-part, cold-applied liquid epoxy resin supplied as a 1\/4 gallon (0.25 gal, 1 kg) two-component sachet in translucent\/amber. Each work pack includes Component A base resin and Component B hardener, covering approximately 19 sq ft. Use it to prime prepared concrete and masonry substrates before applying Liquiseal Liquid Flashing Resin.\u003c\/strong\u003e\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eKey Features:\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo-part epoxy:\u003c\/strong\u003e A solvent-free, two-part, cold-applied liquid epoxy resin primer.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh bonding:\u003c\/strong\u003e A quick-curing, high-bonding primer for acceptable prepared concrete and masonry substrates.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow VOC:\u003c\/strong\u003e Solvent-free with a VOC content of 8 g\/l.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFast cure:\u003c\/strong\u003e Cures in approximately 4 hours at 73°F and 50% relative humidity, with a 20-minute pot life.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrep sand system:\u003c\/strong\u003e Broadcast Liquiseal Concrete \u0026amp; Masonry Preparation Sand into uncured primer before the resin goes down.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelf-contained pack:\u003c\/strong\u003e Component A and Component B mix in the bag, so no separate mixing equipment is required.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLEED documentation:\u003c\/strong\u003e Manufactured in Buffalo, NY with LEED-related information published by Carlisle.\u003c\/li\u003e\n\u003c\/ul\u003e\u003chr\u003e\u003ch2\u003eSpecifications Table:\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/th\u003e\n\u003cth\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eBrand\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCarlisle SynTec\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eSell unit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 x 1\/4 gallon two-component sachet (0.25 gal \/ 1 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct line\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eLiquiseal Liquid Flashing\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eColor\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTranslucent\/Amber\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eMaterial\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eTwo-part, solvent-free liquid epoxy resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePackaging\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1\/4 gallon (0.25 gal \/ 1 kg) sachet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCoverage per unit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e19 sq ft (1.8 sq m) per .25-gallon sachet\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eVOC content\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e8 g\/l\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eUsage time (pot life)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e20 minutes at 73°F, 50% RH\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eWater resistant after\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e3 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCures after\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApply membrane\/coating after\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e4 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003ePhysical state\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eCures to solid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eShelf life\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eApproximately 12 months stored at 35-80°F\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eApplication temperature\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eInstall between 40°F and 90°F ambient\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eIntended use\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003ePriming concrete and masonry substrates before Liquiseal Liquid Flashing Resin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eProduct weight, complete sell unit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 lb\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003chr\u003e\u003ch2\u003eCoverage \u0026amp; How Much You Need:\u003c\/h2\u003e\u003cp\u003eOne 0.25-gallon sachet covers approximately 19 sq ft (1.8 sq m); actual yield varies with substrate smoothness and absorbency. Divide the concrete or masonry flashing area by 19 sq ft to determine sachet quantity.\u003c\/p\u003e\u003ch2\u003eFit and Compatibility:\u003c\/h2\u003e\u003cp\u003eDesigned for use with Carlisle's Liquiseal Liquid Flashing Resin and Liquiseal Liquid Flashing Concrete \u0026amp; Masonry Preparation Sand on prepared concrete and masonry substrates. Do not apply Liquiseal Liquid Flashing Resin over tacky or wet primer; broadcast Preparation Sand into uncured primer at about 50 lbs\/100 sq ft and allow roughly 4 hours of cure before the resin.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eFrequently Asked Questions (FAQ):\u003c\/h2\u003e\u003cp\u003e\u003cstrong\u003eQ: What is included in the sachet?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Each two-component work pack includes Component A (translucent yellow base resin) and Component B (hardener) separated inside the bag by a rubber cord.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How do I mix it?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Knead Component A until uniform, pull away the separating cord, knead the bag thoroughly for about 1 minute until streak-free, then pour it all into a clean mixing pail and apply immediately.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How much area does one sachet cover?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Approximately 19 sq ft per 0.25-gallon sachet, though yield varies with substrate smoothness and absorbency.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: When can I apply the flashing resin?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e After broadcasting Preparation Sand and allowing about 4 hours of cure at 73°F; the resin must only be applied when the primer is completely dry and without tack.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: What temperatures are acceptable?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Do not install below 40°F or above 90°F ambient; pot life shortens as temperature rises.\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eQ: How should I store unused sachets?\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eA:\u003c\/strong\u003e Store in a cool, dry place between 35-80°F out of direct sunlight; shelf life is approximately 12 months, and Carlisle recommends holding at 65-70°F for 24 hours before use.\u003c\/p\u003e\u003chr\u003e\u003ch2\u003eExpert Verdict — Reviewed by the SuperArbor Pro Desk\u003c\/h2\u003e\u003cp\u003ePrime only clean, dry, fully cured concrete and masonry; grind away irregularities, grease, oil, release agents and loose material before mixing, since the 20-minute pot life leaves no time for prep afterward. Apply the full work pack at once rather than splitting the sachet, roll or brush cross-directionally for single-coat coverage, and broadcast Preparation Sand immediately at about 50 lbs\/100 sq ft to give the resin a mechanical key. In warm climates, vapor drive can cause pin-holing, so priming later in the day when temperatures drop helps. Order roughly one sachet per 19 sq ft of flashing detail area.\u003c\/p\u003e\u003cp\u003e\u003cem\u003eWear safety glasses and gloves, avoid eye and skin contact, keep out of reach of children, and never dispose of uncured resin, which is a hazardous material under local, state and federal regulations.\u003c\/em\u003e\u003c\/p\u003e\u003chr\u003e\u003cp\u003e\u003cstrong\u003eOrder the Carlisle SynTec Liquiseal Concrete \u0026amp; Masonry Primer sachet today and prep your concrete details for Liquiseal Liquid Flashing.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Carlisle","offers":[{"title":"Default Title","offer_id":67804660105430,"sku":"CARLSCMP25G","price":128.91,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0778\/5244\/2838\/files\/581862_default_hero.jpg?v=1793124934","url":"https:\/\/buildsupplyus.myshopify.com\/products\/carlisle-syntec-carlscmp25g-carlisle-syntec-liquiseal-concrete-masonry-primer-1-4-gallon-sachet-translucent-amber","provider":"Buildsupply","version":"1.0","type":"link"}